R
TM
THE SINGER'S ULTIMATE CHOICE
FEATURES:
--180W + 180W maximum power output Mixing Amplifier
--Vocal Enhancer with High and Low Contour, Tune and Process controls for
optimal vocal reproduction and rich, vibrant sound
--13-step Digital Key Controller for transposing natural key of source music
--Vocal Cancel/Vocal Partner modes for removing or adding guide vocals from
Multiplex Karaoke media
--Digital Echo with Repeat and Delay controls to add depth and space to vocals
--Three Microphone Inputs with individual Volume controls
--Full-function remote control for ease of operation
--Master Music and Microphone Volume controls
--LED Gain setting to toggle display intensity
--Loudness boost for instant audio gain
--3 RCA style Video Inputs and 3 Video Outputs
--Dedicated Audio Ins for CD, CDG, LD and DVD
--Dedicated Wireless Mic Input and Mic Insert
--Mic Output with switchable Echo
--Connects up to 4 speakers with A/B switch between pairs
Digital Karaoke Amplifier With Vocal Enhancer
Digital Key Display
DA-8808VE
DVD
LD
CDG
CD
Input Selector
Digital Key Control
Mic Master Volume
Music Volume
High
Process
Tune
Low
High
Vocal
Partner
Vocal
Cancel
On
Loudness
Off
On
A
B
Flat
0
10
Top
Bottom 1kHz
8kHz
0
10
Bass
Treble
Music Tone
Balance
Off
Speakers
Power
LED Gain
Remote
Multipex
Delay
Vocal Enhancer
Treble
Repeat
Echo
Bass
Mic 1
Mic 2
Mic 3
Mic 1
Mic 2
Mic
3
Sensor
Digital Echo
Mic Tone
Mic Volume
Mic Inputs
DA-8808VE
Digital Karaoke Amplifier/Mixer With Vocal Enhancer
Safety Instructions
8. Ventilation - The appliance should be situated so its
location does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed,
sofa, rug, or similar surface that may block the
ventilation slots.
CAUTION
RISK OF SHOCK
9. Heat - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
CAUTION: To reduce the risk of electric shock,
do not remove cover (or back). No user-
serviceable parts inside. Only refer servicing to
qualified service personnel.
10. Power Sources - The appliance should be
connected to a power supply only of the type described
in the operating instructions or as marked on the
appliance.
Explanation of Graphical Symbols
The lightning flash & arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of danger.
11. Grounding or Polarization – Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
12. Power-Cord Protection – Power-supply cords
should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the appliance.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and servicing instructions.
WARNING
To reduce the risk of fire or electric shock, do
not expose this unit to rain or moisture.
13. Cleaning – Unplug this unit from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
14. Power lines – An outdoor antenna should be
located away from power lines.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is
operated.
15. Nonuse Periods – The power cord of the appliance
should be unplugged from the outlet when left unused
for a long period of time.
2. Retain Instructions - The safety and operating
16. Object and Liquid Entry – Care should be taken so
that objects do not fall and liquids are not spilled into the
enclosure through openings.
instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in
the operating instructions should be adhered to.
17. Damage Requiring Service – The appliance should
be serviced by qualified service personnel when:
4. Follow Instructions - All operating and use
instructions should be followed.
A. The power supply cord or plug has been damaged; or
B. Objects have fallen into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally
or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
5. Attachments - Do not use attachments not
recommended by the product manufacturer as they may
cause hazards.
6. Water and Moisture - Do not use this unit near water.
For example, near a bathtub or in a wet basement and
the like.
18. Servicing – The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
7. Carts and Stands - The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
Note:
7 A. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause an overturn.
To CATV system installer’s (U.S.A.): This reminder is
provided to call the CATV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected as close to the point of
cable entry as practical.
2
FCC INFORMATION (U.S.A.)
CAUTION:
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
READ THIS BEFORE OPERATING YOUR UNIT
UNIT!: This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Vocopro may void your authority, granted by the FCC,
to use this product.
1. To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future reference.
2. Install your unit in a cool, dry, clean place - away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers, v
motors). To prevent fire or electrical shock, do not expose to
rain and water.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable(s) supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your
FCC authorization to use this product in the U.S.A.
3. Do not operate the unit upside-down.
3. NOTE: This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class "B" digital devices. Compliance with
these requirements provides a reasonable level of
assurances that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment
generates/uses radio frequencies and, if not installed
and used according to the instructions found in the
owner's manual, may cause interference harmful to the
operation of other electronic devices. Compliance with
FCC regulations does not guarantee that interference
will not occur in all installations. If this product is found
to be the source of interference, which can be
determined by turning the unit "Off" and "On", please try
to eliminate the problem by using one of the following
measures:
4. Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
5. Place the unit in a location with adequate air circulation.
Do not interfere with its proper ventilation; this will cause the
internal temperature to rise and may result in a failure.
6. Do not use force on switches, knobs or cords. When
moving the unit, first turn the unit off. Then gently disconnect
the power plug and the cords connecting to other
equipment. Never pull the cord itself.
7. Do not attempt to clean the unit with chemical solvents:
this might damage the finish. Use a clean, dry cloth.
8. Be sure to read the "Troubleshooting" section on common
operating errors before concluding that your unit is faulty.
Relocate either this product or the device that is being
affected by the interference.
9. This unit consumes a fair amount of power even when the
power switch is turned off. We recommend that you unplug
the power cord from the wall outlet if the unit is not going to
be used for a long time. This will save electricity and help
prevent fire hazards. To disconnect the cord, pull it out by
grasping the plug. Never pull the cord itself.
Use power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter(s).
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300-ohm ribbon
lead, change the lead-in to coaxial type cable.
10. To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical storm.
If these corrective measures do not produce satisfactory
results, please contact your local retailer authorized to
distribute Vocopro products. If you can not locate the
appropriate retailer, please contact Vocopro, 1728
Curtiss Court, La Verne, CA 91750.
11. The general digital signals may interfere with other
equipment such as tuners or receivers. Move the system
farther away from such equipment if interference is
observed.
NOTE:
Please check the copyright laws in your country
before recording from records, compact discs,
radio, etc. Recording of copyrighted material may
infringe copyright laws.
CAUTION
Voltage Selector (General Model Only)
The apparatus is not disconnected from the AC power
source so long as it is connected to the wall outlet,
even if the apparatus itself is turned off. To fully insure
that the apparatus is indeed fully void if residual power,
leave unit disconnected from the AC outlet for at least
fifteen seconds.
Be sure to position the voltage selector to match the
voltage of your local power lines before installing the
unit.
220V
110V
3
R
TM
THE SINGER'S ULTIMATE CHOICE
Welcome
And Thank you for purchasing the DA-8808VE from VocoPro, your ultimate choice in Karaoke
entertainment! With years of experience in the music entertainment business, VocoPro is a
leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches,
schools, clubs and individual consumers the opportunity to sound like a star with full-scale club
models, in-home systems and mobile units. All our products offer solid performance and sound
reliability, and to further strengthen our commitment to customer satisfaction, we have customer
service and technical support professionals ready to assist you with your needs. We have provided
some contact information for you below.
VOCOPRO
1728 Curtiss Court
La Verne, CA 91750
Toll Free: 800-678-5348
TEL: 909-593-8893
FAX: 909-593-8890
VocoPro Company Email Directory
Customer Service & General Information
Tech Support
Remember Our Website
packages and promo's. And while you're there don't forget to check out our Club VocoPro for
Karaoke news and events, chat rooms, club directories and even a Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, your ultimate choice in Karaoke
entertainment.
FORYOUR RECORDS
Please record the model number and serial number below, for easy reference, in case of loss or theft. These
numbers are located on the rear panel of the unit. Space is also provided for other relevant information
Model Number
Serial Number
Date of Purchase
Place of Purchase
4
Listening for a lifetime
Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical
enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment
offers. VocoPro and the Electronic Industries Association's Consumer Electronics Group want you to
get the most out of your equipment by playing it at a safe level. One that lets the sound come through
loud and clear without annoying blaring or distortion and, most importantly, without affecting your
sensitive hearing.
Sound can be deceiving. Over time your hearing 'comfort level'adapts to a higher volume of sound. So
what sounds 'normal' can actually be loud and harmful to your hearing. Guard against this by setting
your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
• Pay attention to the different levels in various recordings.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we
want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing
damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic
Industries Association's Consumer Electronics Group recommend you avoid prolonged exposure to
excessive noise. This list of sound levels is included for your protection.
Some common decibel ranges:
Level
30
Example
Quiet library, Soft whispers
Living room, Refrigerator, Bedroom away from traffic
Light traffic, Normal Conversation
Air Conditioner at 20 ft., Sewing machine
Vacuum cleaner, Hair dryer, Noisy Restaurant
Average city traffic, Garbage disposals, Alarm clock at 2 ft.
40
50
60
70
80
The following noises can be dangerous under constant exposure:
Level
90
100
120
140
180
Example
Subway, Motorcycle, Truck traffic, Lawn Mower
Garbage truck, Chainsaw, Pneumatics drill
Rock band concert in front of speakers
Gunshot blast, Jet plane
Rocket launching pad
-Information courtesy of the Deafness Research Foundation
5
Before getting started
Thank you for purchasing the DA-8808VE Digital Karaoke Amplifier/Mixer with Vocal Enhancer. The DA-
8808VE will provide years of reliability and high quality entertainment for you if used properly. Please read
this manual carefully before using your DA-8808VE to ensure best performance.
Unpacking the DA-2808VE
Carefully remove the DA-8808VE from its carton. It is recommended that you store the original
packaging materials in case you need to ship this equipment for any reason.
Be sure you have the following parts and components included with your DA-8808VE:
QUANTITY:
ITEMS:
1
1
1
2
1
DA-2808VE
Stereo RCA Patch Cable
Remote Control
AAA Batteries
AC Power Cable
Digital Karaoke Amplifier With Vocal Enhancer
Digital Key Display
DA-8808VE
DVD
LD
CDG
CD
Input Selector
Digital Key Control
Mic Master Volume
Music Volume
High
Process
Tune
Low
High
Vocal
Partner
Vocal
Cancel
On
Loudness
Off
On
A
B
Flat
0
10
Top
Bottom 1kHz
8kHz
0
10
Bass
Treble
Music Tone
Balance
Off
Speakers
Power
LED Gain
Remote
Multipex
Delay
Vocal Enhancer
Treble
Repeat
Echo
Bass
Mic 1
Mic 2
Mic 3
Mic 1
Mic 2
Mic
3
Sensor
Digital Echo
Mic Tone
Mic Volume
Mic Inputs
POWER
DVD
CDG
LD
CD
SELECTOR
INPUT
MIC VOL
VOC/C VOC/P
MUSIC VOL
Multiplex
b
#
R
TM
THE SINGER'S ULTIMATE CHOICE
DA-8808VE
AAA
AAA
6
Getting connected
Connecting input source players to the DA-8808VE
The DA-8808VE has stereo paired RCA inputs labeled for RCA stereo audio ouptut from CD, CDG, LD and
DVD players and three VIDEO inputs for corresponding video signals from CDG, LD and DVD players.
Any other audio device with RCA stereo output such as a cassette player can be connected to these inputs.
also. The device associations are for reference only.
1. Use paired RCA stereo cables to output audio signal from your players to the corresponding DA-8808VE
CD, CDG, LD and DVD AUDIO INPUTS. Any other audio device with RCA stereo output such as a cassette
player can be connected to these inputs. also.
2. Connect the video outputs from your respective players to the DA-8808VE’s CDG, LD and DVD VIDEO
INPUTS . Use RCA style video cables (usually coded in yellow) to carry the signal that will display Karaoke
graphics and video to TVs or other monitor devices when output from the DA-8808VE (see Connecting TVs/
Monitors).
Recording
VHF-3300
Device
Wireless Mic System
CLG-600
Compressor/Limiter
INAUDIBLE
GAIN
30
27
24
21
18
15
12
9
6
4
2
1
LEVEL
-30
-20
-10
-6
-3
0
+3
+6
INAUDIBLE
GAIN
30
27
24
21
18
15
12
9
6
4
2
1
LEVEL
-30
-20
-10
-6
-3
0
+3
+6
-
+
-
+
VHF-35
CH
1
CH
2
-20
-10
2.5
50
0.5
0
3
-20
-10
2.5
50
0.5
0
3
-35
-10
-20
0
-35
-10
-20
0
OUT
OUT
MAN
MNO
MAL
-50
0
-30
+10
1.5
8
-50
0
-30
+10
1.5
8
PROFESSIONAL VHF DUAL
WIRELESS MICROPHONE
RF
CLG-600
DUAL CHANNEL COMPRESSOR
LIMITER WITH GATE
RF
OFF
+10
-40
+20
1
0.1
200
.05
4
-20
+20
OFF
6
OFF
+10
-40
+20
1
0.1
200
.05
4
-20
+20
OFF
6
THRESHOLD
dB
THRESHOLD
dB
RATIO
N.1
A
mSec
TT
A
CK
RELEASE
Sec
OUTPUT
dB
PROCESS
THRESHOLD
dB
THRESHOLD
dB
RATIO
M1
RELEASE
Sec
OUTPUT
dB
CH
A
CH
B
AUT
IN
STO
A
IN
msec
EXPANDER/GATE
COMPRESSOR/LIMITER
ENHANCER
MODE
EXPANDER/GATE
COMPRESSOR/LIMITER
ENHANCER
VOLUME
VOLUME
AC 117/230V
60/50Hz 200W
MIC
INSERT
120V
240V
ON OFF
VOLTAGE SELECT
PROFESSIONAL EQUIPMENT
REC
OUT
MIC
OUT
ECHO
EFFECT
NO USER SERVICEABLE PARTS INSIDE
OUTLET
UNSWITCHED
A
B
AC 117/230V
50/60Hz
1
2
3
CDG
VIDEO INPUT
LD
DVD
WIRELESS
INPUT
VIDEO OUTPUT
VARIABLE SPEED FAN
DO NOT BLOCK
R
SPEAKERS
L
FUSE
AC 6.3A 250V
A OR B 6 MIN/SPEAKER
A+B 12 MIN/SPEAKER
CD
CDG
AUDIO INPUT
LD
DVD
PRE
OUTPUT
OUT
EFFECT LOOP
IN
POWER
OPEN/CLOSE PLAY/PAUSE NEXT
PREV
VOCAL
Effects Processor
DVG-390K
Player
LD Player
VP-600
Power Amp
DVG-808K
Player
CDG-4000
Player
7
Getting connected continued
Connecting TVs/Monitors to the DA-8808VE
The DA-8808VE has three VIDEO OUTPUT jacks which send video and/or decoded CD+G graphics patched
from your players to TVs and other video monitor devices. This enables multiple TV configurations for per-
formers to enjoy and KJs and VJs to program a set.
1. Connect RCA style video cables from VIDEO OUTPUT jacks 1, 2 and 3 on the DA-8808VE to the VIDEO
INPUT jack on your TV or other monitor. You may need to manually switch your TV to video mode, while
some models automatically switch when a video signal is detected. On most TVs, the INPUT jack is labeled
AUX or VIDEO.
--If the TV does not have a VIDEO IN jack, you may be able to connect the video cable to the
VIDEO INPUT of a VCR or DVD player and connect the RF OUTPUT on the VCR or DVD
player to the TV ANTENNA INPUT jack.
--If you do not have a VCR or DVD player, you will need to use an RF Modulator to make the
adaption between jacks. RF Modulators are easy to find in the electronics section of many
stores.
Rear of DA-8808VE
AC 117/230V
60/50Hz 200W
MIC
INSERT
120V
240V
ON OFF
VOLTAGE SELECT
PROFESSIONAL EQUIPMENT
REC
OUT
MIC
OUT
ECHO
EFFECT
NO USER SERVICEABLE PARTS INSIDE
OUTLET
UNSWITCHED
A
B
AC 117/230V
50/60Hz
1
2
3
CDG
VIDEO INPUT
LD
DVD
WIRELESS
INPUT
VIDEO OUTPUT
VARIABLE SPEED FAN
DO NOT BLOCK
R
SPEAKERS
L
FUSE
AC 6.3A 250V
A OR B 6 MIN/SPEAKER
A+B 12 MIN/SPEAKER
CD
CDG
AUDIO INPUT
LD
DVD
PRE
OUTPUT
OUT
EFFECT LOOP
IN
TV/Monitor
TV/Monitor
TV/Monitor
8
Front panel descriptions and functions
1. POWER - Use this button to turn the DA-8808VE ON or OFF.
2. INPUT SELECTOR - These 4 buttons allow you to select between DVD, LD, CDG and standard CD player
output to the DA-8808VE. This allows the DA-8808VE to differentiate between all the related source AUDIO
INPUT options available on the back panel.
Digital Key Display
3. KEY CONTROL - You can adjust the key of your source music in half-step
+
2
increments to match the natural range of your voice using the KEY CONTROL
buttons. To flat (b) or lower the key, press the left KEY CONTROL button. To
sharp (#) or raise the key, press the right button. To return to the original
key of the music input source, press the center button. You will see the
Digital Key Control
DIGITAL KEY DISPLAY reflect the number of steps you have increased or
decreased displayed as numerals with +/-, or 0 for the original key.
4. LED METER - The LED METER displays stereo output levels for the DA-2808VE mix. The optimal level for
a clean, undistorted signal at high output is to show only occasional peaking in the red LED range. Lower
the MUSIC VOLUME and MIC MASTER VOLUME if red LEDs are frequent.
5. MIC MASTER VOLUME - This control adjusts the mixed output level for MIC 1, MIC 2 and MIC 3. Turn
clockwise to increase and counter-clockwise to decrease the MIC VOLUME.
6. MUSIC VOLUME - This control adjusts the output level for whichever player connected to an
AUDIO INPUT is assigned with the INPUT SELECTOR.
7. SPEAKERS A/B - These buttons switch between 2 sets of SPEAKER OUTPUT.
8. LED GAIN - Select between a HIGH or FLAT LED display mode for different effect and visibility.
2
3
4
5
6
Digital Karaoke Amplifier With Vocal Enhancer
Digital Key Display
DA-8808VE
DVD
LD
CDG
CD
Input Selector
Digital Key Control
Mic Master Volume
Music Volume
High
Process
Tune
Low
High
Vocal
Partner
Vocal
Cancel
On
Loudness
Off
On
A
B
Flat
0
10
Top
Bottom 1kHz
8kHz
0
10
Bass
Treble
Music Tone
Balance
Off
Speakers
Power
LED Gain
Remote
Multipex
Delay
Vocal Enhancer
Treble
Repeat
Echo
Bass
Mic 1
Mic 2
Mic 3
Mic 1
Mic 2
Mic
3
1
Sensor
Digital Echo
Mic Tone
Mic Volume
Mic Inputs
7
8
9
Front panel descriptions and functions continued
9. VOCAL CANCEL/VOCAL PARTNER - With Multiplex media, lead vocals and music are recorded in
separate left and right stereo channels. When VOCAL CANCEL is selected, the LED will illuminate and the
lead vocal channel will be removed, leaving only a duplicated instrumental track to left and right. When
VOCAL PARTNER is pressed, LED will illuminate and the vocal track will only be activated while there is no
microphone input. In other words, while the Karaoke singer is performing, the vocals will never drop entirely
out, keeping the action going.
High
Process
Tune
Low
VOCAL ENHANCER
Because the DA-8808VE allows you to “TUNE”
the frequency and mix, or “PROCESS” of your
microphone output, it is a more powerful EQ
tool than standard Bass and Treble controls.
On
0
10
Top Bottom 1kHz 8kHz
0
10
Off
Vocal Enhancer
10. VOCAL ENHANCER ON/OFF - This button activates or deactivates the VOCAL ENHANCER
processor feature. Try using this button to do an A/B comparison of a processed and unprocessed signal
while someone sings into the microphone. This is helpful for fine-tuning and system diagnostics.
11. HIGH - Similar to a Treble control, this boosts the HIGH frequencies in your EQ, from 0 to 10.
12. PROCESS - This control is similar to a Balance control for the EQ, where you can select between a mix
predominantly “High end” mix and a bassier “Low end” mix.
13. TUNE - This control allows you fine tune specific frequencies more precisely, by setting the lower cutoff
frequency of the high-pass filter between 1kHz and 8kHz. Fortunately, you can still use it without under-
standing what that means. The best way to use this control is by adjusting it while someone is singing into
the microphone to find that “sweet spot” where the EQ sounds clean (not harsh, without distortion) and well-
balanced.
14. LOW - Similar to a Bass control, this boosts the LOW frequencies in your EQ, from 0 to 10.
15. LOUDNESS ON/OFF - For an instant Volume/Gain, the LOUDNESS button is an easy way to improve
your mix when you need an extra boost. Perfect for varying volume controls between tracks or singers.
Digital Karaoke Amplifier With Vocal Enhancer
Digital Key Display
DA-8808VE
DVD
LD
CDG
CD
Input Selector
Digital Key Control
Mic Master Volume
Music Volume
High
Process
Tune
Low
High
Vocal
Partner
Vocal
Cancel
On
Loudness
Off
On
A
B
Flat
0
10
Top
Bottom 1kHz
8kHz
0
10
Bass
Treble
Music Tone
Balance
Off
Speakers
Power
LED Gain
Remote
Multipex
Vocal Enhancer
Treble
Delay
Repeat
Echo
Bass
Mic 1
Mic 2
Mic 3
Mic 1
Mic 2
Mic
3
Sensor
Digital Echo
Mic Tone
Mic Volume
Mic Inputs
9
10
11 12 13 14
15
10
Front panel descriptions and functions continued
MUSIC TONE controls
16. BASS/TREBLE - The BASS control adjusts the low end of your source music and the TREBLE
control adjusts the high end.
17. BALANCE - This control determines the Left to Right stereo BALANCE between speaker outputs.
18. REMOTE SENSOR - When operating the DA-8808VE with the Remote Control, direct the Remote
towards this SENSOR within 23 feet. Maintain a line of sight between Remote and REMOTE SENSOR clear
of obstacles to prevent signal deflection.
DIGITAL ECHO
19. DELAY - This control adjusts the length of time for each ECHO interval, or REPEAT. Rotating the
DELAY control clockwise will increase the DELAY, creating the effect of more “space.”
20. REPEAT - This control adjusts the number of ECHO repeats applied to the signal until the effect
decays, or fades out.
21. ECHO - This control is the overall level for the ECHO effect. Rotate clockwise to increase the amount of
ECHO effect applied to the signal, and counter-clockwise to decrease.
22. MIC TONE - The BASS control adjusts the low end of the microphone mix from MIC 1, 2
and 3, while the TREBLE control adjusts the high end of the mix.
23. MIC VOLUME - These level controls for MIC 1, 2 and 3 should be adjusted individually to get the best
mix when multiple performers are singing. Rotate clockwise to increase and counter-clockwise to decrease
VOLUME for each mic.
24. MIC 1, 2, 3 INPUTS - Connect your 1/4” cabled microphones here.
Digital Karaoke Amplifier With Vocal Enhancer
Digital Key Display
DA-8808VE
DVD
LD
CDG
CD
Input Selector
16
17
Digital Key Control
Mic Master Volume
Music Volume
High
Process
Tune
Low
High
Vocal
Partner
Vocal
Cancel
On
Loudness
Off
On
A
B
Flat
0
10
Top
Bottom 1kHz
8kHz
0
10
Bass
Treble
Music Tone
Balance
Off
Speakers
Power
LED Gain
Remote
Multipex
Delay
Vocal Enhancer
Treble
Repeat
Echo
Bass
Mic 1
Mic 2
Mic 3
Mic 1
Mic 2
Mic
3
Sensor
Digital Echo
Mic Tone
Mic Volume
Mic Inputs
18 19
20 21
22
23
24
11
Rear panel descriptions and functions
1. RECORD OUT - These RCA output jacks are designed for connection to a recording device such as a
cassette deck, CD burner or hard disc recorder. Output from the RECORD OUT jacks is line-level, so the
MASTER VOLUME controls will not affect the output signal to your recording device.
2. MIC OUT - Using these RCA output jacks, you can isolate your mic mix, without the source music
audio input, for output to an external device.
3. ECHO EFFECT ON/OFF - This switch will assign ECHO to the mic mix output through MIC OUT (#2).
4. MIC INSERT - This jack is used for connection of an outboard processor such as a compressor using
only a single 1/4” TRS (Tip = send, Ring = return, Sleeve = signal ground).
5. WIRELESS INPUT - This input is dedicated for the output from wireless microphone systems.
6. VIDEO INPUT - Connect the RCA style video output from your CDG, LD, and DVD player to the respec-
tive jacks in this section.
7. VIDEO OUTPUT - Connect RCA style video cables from these outputs to the video inputs of your TV or
other video monitor device.
8. VOLTAGE SELECTOR - Using this switch you can select between 120V and 240V power settings
9. AC POWER OUTLET - This unswitched AC outlet is for providing power to an external device. NOTE:
DO NOT CONNECT A DEVICE THAT IS DESIGNED FOR 240V USE OR HAS A POWER CONSUMPTION
LEVEL HIGHER THAN 200W.
1
2
3
4
6
7
8
9
AC 117/230V
60/50Hz 200W
MIC
INSERT
120V
240V
ON OFF
VOLTAGE SELECT
PROFESSIONAL EQUIPMENT
REC
OUT
MIC
OUT
ECHO
EFFECT
NO USER SERVICEABLE PARTS INSIDE
OUTLET
UNSWITCHED
A
B
AC 117/230V
50/60Hz
1
2
3
CDG
VIDEO INPUT
LD
DVD
WIRELESS
INPUT
VIDEO OUTPUT
5
VARIABLE SPEED FAN
DO NOT BLOCK
R
SPEAKERS
L
FUSE
AC 6.3A 250V
A OR B 6 MIN/SPEAKER
A+B 12 MIN/SPEAKER
CD
CDG
AUDIO INPUT
LD
DVD
PRE
OUTPUT
OUT
EFFECT LOOP
IN
12
Rear panel descriptions and functions continued
10. AUDIO INPUT - Use these inputs for connecting CD, CDG, LD, DVD or other players and other music
sources using RCA cables. The labels here are for reference only. So, you can connect a cassette player to
the LD input, for example, and get the same results.
11. PRE OUTPUT - These jacks are designed for connection to external power amplifiers. Output signals
from the PRE OUTPUT are sent before the DA-8808VE amplification stage. This allows you to power your
speaker system from a separate amplifier rather than the speaker output from the DA-8808VE.
12. EFFFECT LOOP - These jacks are necessary to carry the stereo signal for the DA-8808VE’s internal
effects to left and right channel output. The 2 Loop Bars which are already installed in the EFFECT LOOP IN
and OUT jacks of the DA-880VE allow the EFFECT LOOP to operate internally. However, if you wish to bypass
the internal effects, these jacks enable you to connect external effects devices to the DA-8808VE in a stereo
loop.
If you prefer to connect external effects, use RCA cables to connect from the EFFECT LOOP OUT jack pic-
tured here to your external effect unit EFFECT LOOP input, and then out from the component to the EFFECT
LOOP IN of the DA-8808VE. This creates a continuous stereo loop.
13. SPEAKERS OUTPUT A & B - You can connect up to 4 different speakers between SPEAKERS OUT-
PUT A and B. Use ‘banana plug” style speaker cables for left and right of each pair. These can be powered
simultaneously or in individual pairs using the SPEAKERS A/B buttons on the front panel (#7).
14. AC POWER CABLE TERMINAL - Connect the included AC Power Cable here and the other end to an
electrical outlet.
15. FUSE - This plastic cover is the housing for the DA-880VE’s fuse. Use only FUSE type AC 6.3A, 250V
when replacing the fuse.
AC 117/230V
60/50Hz 200W
MIC
INSERT
120V
240V
ON OFF
VOLTAGE SELECT
PROFESSIONAL EQUIPMENT
REC
OUT
MIC
OUT
ECHO
EFFECT
NO USER SERVICEABLE PARTS INSIDE
OUTLET
UNSWITCHED
A
B
AC 117/230V
50/60Hz
1
2
3
CDG
VIDEO INPUT
LD
DVD
WIRELESS
INPUT
14
15
VIDEO OUTPUT
VARIABLE SPEED FAN
DO NOT BLOCK
R
SPEAKERS
L
FUSE
AC 6.3A 250V
A OR B 6 MIN/SPEAKER
A+B 12 MIN/SPEAKER
CD
CDG
AUDIO INPUT
LD
DVD
PRE
OUTPUT
OUT
EFFECT LOOP
IN
10
11 12
13
13
Remote control descriptions and functions
The maximum operating distance between the Remote Control and the REMOTE SENSOR is approximately
23 feet. If the effective distance of the Remote decreases, replace the batteries. To install new batteries,
remove the battery compartment lid on the back of the Remote and insert two AAA batteries with polarities
aligned.
23 feet
1
POWER
1. POWER - This remote control button turns the DA-
8808VE ON/OFF
2
DVD
CDG
LD
CD
2. INPUT SELECTOR - These buttons switch between the sig-
nals from CD, CDG, LD and DVD inputs. Whicever player or
source music is connected to these respective AUDIO INPUTS
will be activated with these keys.
SELECTOR
INPUT
MIC VOL
3
4
VOC/P
MUSIC VOL
VOC/C
3. MIC VOLUME - Use the to raise the MIC MASTER
VOLUME (front panel, #5) and the to lower this mixed MIC
MASTER VOLUME. You will see the controls on the DA-
8808VE move as you make adjustments using the remote
keys.
Multiplex
b
#
5
6
DIGITAL KEY CONT.
4. MUSIC VOLUME - Use the to raise the MUSIC VOLUME
(front panel, #6) and the to lower the MUSIC VOLUME. You
will see the controls on the DA-8808VE move as you make
adjustments using the remote keys.
R
TM
THE SINGER'S ULTIMATE CHOICE
DA-8808VE
5. VOCAL CANCEL/VOCAL PARTNER - With Multiplex media, lead vocals and music are
recorded in separate left and right stereo channels. When the VOCAL CANCEL (VOC/C) button on the
remote is selected, the LED will illuminate and the lead vocal channel will be removed, leaving a duplicated
instrumental track to left and right only. When VOCAL PARTNER (VOC/P) is pressed, the LED will illuminate
and the vocal track will only be activated only while there is no microphone input. In other words, while the
Karaoke singer is performing, the vocals will never drop entirely out, keeping the action going.
6. DIGITAL KEY CONTROL - You can adjust the key of your source music in half-step increments to match
the natural range of your voice using the KEY CONTROL buttons on the remote control. To flat (b) or lower
the key, press the left KEY CONTROL button. To sharp (#) or raise the key, press the right button. To
return to the original key of the music input source, press the center button. You will see the DIGITAL KEY
DISPLAY reflect the number of steps you have increased or decreased displayed as numerals with +/-, or 0
for the original key.
14
Advanced Operations
Working with vocals using external effects devices
Often, vocalists use external effects such as Echo, Reverb and Key Control. While enhancing vocals, these
effects can also limit the signal’s sound quality. The DA-8808VE’s Vocal Enhancer can help “clean up” the vo-
cal signal after effects have been applied.
The frequency bandwidth of most vocals is approximately 300Hz - 6kHz. The DA-8808VE can improve
the sound quality of frequencies across this range so that microphone input has a more natural and clean
sound. Nuances of your vocals can be emphasized without affecting the overall sound. Since every voice is
different, we recommend that you experiment with different settings to find the sound which best suits your
preferences.
Using the Vocal Enhancer
High
Process
Tune
Low
On
0
10
Top Bottom 1kHz 8kHz
0
10
Off
Vocal Enhancer
Use of the Vocal Enhancer will increase your speaker system’s acoustic performance and its audible level in
a room. This is particularly effective in environments with difficult acoustics. When using the DA-8808VE’s
Vocal Enhancer, MIC MASTER VOLUME level may need to be adjusted as perceived
volume increases.
1. Connect a microphone with a 1/4” cable to MIC INPUT 1, 2 or 3.
2. Select the VOCAL ENHANCER to the ON (in) position.
3. Start with the HIGH, PROCESS, TUNE and LOW controls at their center positions.
4. Adjust the HIGH and LOW clockwise or counterclockwise until you find a comfortable balance where they
are both equally audible while neither is causing feedback or distortion of the signal.
5. Now adjust the TUNE controls until you reach the desired cutoff frequency for the high-pass filter.
Ultimately, you should be able to settle on a “sweet spot” frequency setting that improves the overall tone of
your treble and bass without leaving either sounding harsh or dominant in the mix.
6. For further fine tuning, think of the PROCESS control as an overall balance between HIGH, or treble (TOP)
and LOW, or bass (BOTTOM). This is a largely a matter of preference, so you should experiment to find the
PROCESS setting that best suits your ears.
7. Try an ON/OFF comparison with the VOCAL ENHANCER to get a better idea for how it is improving your
tone and to better acquaint yourself with the result of adjusting the controls .
15
DA-8808VE Specifications
MAXIMUM POWER OUTPUT-------------- 180W + 180W
AUDIO
MICROPHONE---------------------------------------------- 2.5MV/10K
DVD/LD/CDG/CD------------------------------------- 150MV/50 K
VIDEO
DVD/ LD / CDG --------------------------------------- 1V P-P/75
FREQUENCY RESPONSE
DVD/ LD / CDG --------------------------------------- 20Hz–20kHz 3db
TONE CONTROL (MUSIC / MIC)
BASS-------------------------------------------------------------
10db / 8db (100Hz) 3db
10db / 8db (10KHz) 3db
TREBLE --------------------------------------------------------
LOUDNESS CONTROL
100Hz---------------------------------------------------------- +8db / 3db
10KHz---------------------------------------------------------- +5db / 3db
PROCESSOR
VOCAL ENHANCER------------------------------------ HIGH. PROCESS. TUNE. LOW CONTROL
ECHO DELAY TIME------------------------------------- 100 msec – 200 msec
KEY CONTROL RANGE------------------------------ +6/-6 KEY INTERVALS (13 STEPS)
SIGNAL TO NOISE RATIO--------------------------- >50db
POWER SUPPLY, OTHER
POWER REQUIREMENTS-------------------------- AC 120V/240V 60Hz/50Hz
POWER CONSUMPTION--------------------------- 490 WATT
AC OUTLET
UNSWITCHED--------------------------------------------- 1 (MAX 200W)
DIMENSIONS
(W x D x H):------------------------------------------------ 430 x 385 x 165 (mm)
ACCESSORIES
AC POWER CORD ------------------------------------- 1
RCA CABLES --------------------------------------------- 2
OPERATING INSTRUCTIONS -------------------- 1
REMOTE CONTROL ------------------------------------ 1
BATTERIES (UM-4) ------------------------------------- 2
WARRANTY CARD ------------------------------------ 1
16
|